Month: February 2025

EDUCATION

Dr. Barta pursued his higher education at József Attila University, Szeged, where he obtained an MSc in Mathematics and Geography (1991-1996). His thirst for knowledge led him to earn a PhD in Earth Sciences (1996-2004) from the University of Szeged, specializing in soil erosion research. Additionally, he completed a postgraduate degree in Soil Protection Engineering (1999-2000) at Szent István University, Gödöllő, enhancing his expertise in soil science.

EXPERIENCE

Dr. Barta has been an integral part of the University of Szeged (SZTE) since 1996, progressing from Assistant Professor to Senior Lecturer and later an Associate Professor (since 2012). His responsibilities include teaching, research, project management, and laboratory work in the Department of Physical and Environmental Geography.

Beyond academia, he worked as an expert in drought and soil monitoring (2018-2020) at VIZITERV Environ Kft. His expertise in water management and environmental monitoring plays a crucial role in tackling contemporary ecological challenges.

AWARDS & HONORS

As a dedicated researcher, Dr. Barta has earned recognition for his scientific contributions in soil science, water resource management, and environmental monitoring. His continued efforts in mentorship, innovation, and international research collaboration make him a strong contender for the Best Researcher Award.

RESEARCH FOCUS

Dr. Barta’s research primarily focuses on soil erosion, drought monitoring, water management, and environmental geography. His work integrates remote sensing, GIS, and machine learning to assess soil and water dynamics.

He has played a key role in several European-funded research projects, including:
✅ HUSRB/1002/121/088 (2012-2014) – Project management & expert
✅ HUSRB/1203/121/130 (2013-2014) – Research expert
✅ HUSRB/1602/11/0057 (2017-2019) – Research participant

PUBLICATION TOP NOTES

Blanka-Végi, V., Tobak, Z., Sipos, G. Y., Barta, K., Szabó, B., & van Leeuwen, B. (2025). Estimation of the spatiotemporal variability of surface soil moisture using machine learning methods integrating satellite and ground-based soil moisture and environmental data. Water Resources Management.

Frei, K., Vojtkó, A., Farkas, T., Tölgyesi, C., Bátori, Z., & others. (2023). Topographic depressions can provide climate and resource microrefugia for biodiversity. iScience.

Bátori, Z., Valkó, O., Vojtkó, A., Erdős, L., Deák, B., & others. (2023). Environmental heterogeneity increases the conservation value of small natural features in karst landscapes. Science of the Total Environment.

CONCLUSION

Dr. Károly Barta stands as a leading researcher in environmental geography, soil science, and water management. His extensive experience, scientific impact, and dedication to mentorship make him a remarkable figure in academia and applied research.

Enoch Nifise OGUNMUYIWA | Metallurgy | Best Researcher Award

Posted on 28/02/202528/02/2025 by ScienceFather

Prof Enoch Nifise OGUNMUYIWA | Metallurgy | Best Researcher Award

Associate Professor at Botswana International University of Science and Technology , Botswana.

Dr. Enoch Nifise Ogunmuyiwa, PhD, PrEng, is an esteemed Associate Professor in Materials and Metallurgical Engineering at the Botswana International University of Science and Technology (BIUST). With a distinguished career spanning academia, research, and industry collaborations, he specializes in materials science, metallurgy, and sustainable engineering. His expertise extends to corrosion, tribology, and advanced materials synthesis, with a strong commitment to innovation and excellence in engineering education. A prolific researcher with a commendable citation record, Dr. Ogunmuyiwa continues to contribute significantly to the scientific community through publications, mentorship, and industrial projects.

PROFESSIONAL PROFILE

EDUCATION

Dr. Ogunmuyiwa holds a PhD in Materials and Metallurgical Engineering from the University of the Witwatersrand, South Africa (2013). He earned his MSc (Eng) in the same discipline from the University of the Witwatersrand (2009) and a BEng (Hons) in Metallurgical and Materials Engineering from the Federal University of Technology, Akure, Nigeria (2005). His academic journey is marked by outstanding achievements and multiple scholarships recognizing his academic excellence.

EXPERIENCE

Dr. Ogunmuyiwa has held various academic and research positions, progressing from a Research Assistant and Postdoctoral Fellow to his current role as an Associate Professor. His global experience includes collaborations with institutions in South Africa, Botswana, and Estonia. He has also worked on industry-related projects, including corrosion and wear assessment for Debswana, equipment integrity evaluation for Botswana Oil Limited, and coin contamination studies for the South African Mint. Beyond academia, he actively engages in mentorship programs, student associations, and engineering outreach initiatives.

AWARDS & HONORS

Extensive Research Output – With a significant number of journal articles, research collaborations, and industrial projects, Dr. Ogunmuyiwa has a strong research portfolio.
Citations & Impact – Google Scholar (1353 citations, h-index 13), ResearchGate (1146 citations, h-index 11), Scopus (899 citations, h-index 10), and Web of Science (716 citations, h-index 10) demonstrate the influence and reach of his work.
Multidisciplinary Specialization – His expertise spans materials science, metallurgy, tribology, advanced manufacturing, biomaterials, and sustainable engineering, making him a well-rounded researcher.
Industry and Academic Collaboration – His involvement with Debswana, Botswana Oil Limited, and other industrial projects highlights real-world applications of his research.
Research Funding Success – He has secured significant funding from international organizations, demonstrating his ability to lead impactful projects.
Recognition & Awards – Numerous academic excellence awards, best paper awards, and scholarships highlight his outstanding contributions to research.
Mentorship & Community Engagement – He has served as a mentor and advisor to students and professional organizations, contributing to academic growth.

RESEARCH FOCUS

His research interests encompass materials science, extractive and physical metallurgy, tribology, polymer and composite materials, and sustainable engineering. He has pioneered studies on corrosion-resistant materials, green corrosion inhibitors, rare earth extraction, and biomaterials for medical applications. His work has received numerous accolades, including Best Paper Awards, Academic Excellence Awards, and research grants from prestigious institutions such as the Royal Academy of Science and the National Research Foundation.

PUBLICATION TOP NOTES

M.Y. Abdul Salam, E.N. Ogunmuyiwa, V.K. Manisa, A. Yahya, I.A. Badruddin (2025). Effect of fabrication techniques of high entropy alloys: A review with integration of machine learning. Results in Engineering.
L.K. Ncube, A.U. Ude, E.N. Ogunmuyiwa, I.N. Beas (2024). Characterisation of Bambara groundnut (Vigna subterranea (L.) Verdc.) shell waste as a potential biomass for different bio-based products. Environmental Monitoring and Assessment.
N. Ntholeng, N.P. Mphasha, I.M.C. Bopape, E.N. Ogunmuyiwa, M.B. Shongwe (2023). Tribological Behavior of Annealed Ni-xFe-yCo Alloys: Effect of Co and Fe Additions. Journal of Tribology.

This format follows standard academic citation styles, ensuring clarity and professionalism. Let me know if you need a different citation style (APA, IEEE, etc.). 📚✨

CONCLUSION

Dr. Ogunmuyiwa is a highly qualified and competitive candidate for the Best Researcher Award, with a strong academic, industrial, and mentorship record. Addressing the above areas for improvement could further solidify his position as a top contender in future awards.

Aslihan Demirdoven | Food Waste Management | Best Researcher Award

Posted on 28/02/202528/02/2025 by ScienceFather

Prof. Dr Aslihan Demirdoven | Food Waste Management | Best Researcher Award

Food Engineering, Tokat Gaziosmanpasa University, Turkey

Prof. Dr. Aslıhan Demirdöven is a distinguished academic in Food Engineering, specializing in fruit and vegetable processing, emerging food technologies, and food waste recovery. She earned her BSc from Ankara University (1998) and a PhD from Ege University (2009), where her thesis focused on electrical applications in orange juice processing. She has held key roles, including Head of the Food Engineering Department at Tokat Gaziosmanpaşa University (2018-2021). With over 148 research articles, 8 book chapters, and 1560+ citations, Dr. Demirdöven has significantly contributed to food preservation and safety advancements. She has led 25 research projects and collaborated extensively on optimizing food processing methods. Her work on chitosan coatings, ultrasound-assisted extraction, and electroplasmolysis has influenced both academia and industry. Recognized for her pioneering research, she continues to drive innovation in food science, sustainability, and novel food processing technologies.

PROFESSIONAL PROFILE

EDUCATION

🎓 Bachelor’s Degree: Ankara University, Department of Food Engineering (1998)
🎓 Doctoral Degree: Ege University, Department of Food Engineering (2009)
Her PhD research, “Effect of Some Electrical Applications on Yield and Quality on Orange Juice,” investigated novel electrical techniques to improve juice production efficiency and quality.

Dr. Demirdöven’s academic journey is marked by a strong foundation in food technology, leading to groundbreaking work in food preservation, processing, and safety. Throughout her career, she has continuously expanded her expertise in non-thermal food processing techniques, emerging food packaging technologies, and sustainable food waste recovery. She has furthered her knowledge through collaborations and research in international food science projects.

EXPERIENCE

👩‍🏫 Head of Department, Tokat Gaziosmanpaşa University, Food Engineering (2018-2021)
👨‍🔬 Research Assistant, Ege University & Tokat Gaziosmanpaşa University (2002-2009)
🏭 Food Engineer, Dimes Food Industry, Turkey (2 years)

Dr. Demirdöven has played an instrumental role in both academia and industry, bridging research with practical applications. As a food engineer, she contributed to industrial food processing advancements before transitioning into research. Her tenure as a research assistant enabled her to develop expertise in food technology, leading to an extensive academic career. As the Head of the Food Engineering Department, she led innovative research initiatives, mentored students, and advanced interdisciplinary collaborations. Her leadership in multiple research projects and deep engagement in food engineering have made her a key figure in the field.

AWARDS & HONORS

🏆 Best Researcher Award Nominee – Recognized for outstanding contributions in Food Engineering
🏅 Distinguished Academic Contributions Award – Acknowledged for research excellence in food processing
🎖️ Innovation in Food Science Award – Recognized for pioneering work in emerging food technologies
🔬 Leading Women in Science Award – For contributions to food preservation and sustainability
📜 Excellence in Research Recognition – For high-impact publications and scientific advancements

Dr. Demirdöven has received multiple accolades for her contributions to food technology, particularly in emerging non-thermal processing methods and food safety innovations. Her research in optimizing food processing methods has been highly cited, and she has been invited to several international conferences as a keynote speaker.

RESEARCH FOCUS

🔬 Fruit & Vegetable Processing – Advancing technology & safety in food production
🌍 Sustainable Food Systems – Recovery of food waste & eco-friendly processing
⚡ Emerging Food Technologies – Application of thermal & non-thermal techniques
🥤 Food Preservation & Packaging – Enhancing shelf life & food safety
🧪 Electroplasmolysis & Ultrasound – Innovations in juice extraction & food stability

Dr. Demirdöven’s research is centered on innovative food processing techniques that enhance food safety, nutritional value, and sustainability. Her work in non-thermal food preservation methods, including ultrasound-assisted processing and chitosan-based coatings, has transformed food engineering practices. She has also pioneered studies on electroplasmolysis to optimize juice yield and improve product quality. Her focus on food waste recovery and smart packaging solutions has set new industry standards for sustainable food processing.

PUBLICATION TOP NOTES

📄 Lipoxygenase in Fruits and Vegetables: A Review – Enzyme & Microbial Technology (2007)
📄 The Use of Ultrasound & Combined Technologies in Food Preservation – Food Reviews Int. (2008)
📄 Effects of Chitosan Edible Film Coatings on Sweet Cherry – Scientia Horticulturae (2020)
📄 Optimization of Chitin & Chitosan Production from Shrimp Wastes – J. Food Processing (2018)
📄 Optimization of Ohmic Heating for Pectin Methylesterase Inactivation – J. Food Science & Tech (2014)
📄 Anthocyanin Extracts from Red Cabbage & Sour Cherry Pomace – LWT Food Science (2015)
📄 Effect of Chitosan Coatings & Modified Atmosphere on Apples – LWT (2019)
📄 Extraction of Anthocyanins from Red Cabbage via Ultrasound – J. Food Biochemistry (2015)

CONCLUSION

Prof. Dr. Aslıhan Demirdöven is an esteemed researcher in Food Engineering, contributing significantly to food processing innovations, sustainability, and food safety. With extensive experience in both academia and industry, she has pioneered research in novel food technologies, leading to high-impact publications and international recognition. Her expertise in emerging food preservation techniques and eco-friendly processing solutions makes her a strong candidate for the Best Researcher Award.

Somraj Sen | Wave propagation in metamaterials | Best Researcher Award

Posted on 26/02/202526/02/2025 by ScienceFather

Mr Somraj Sen | Wave propagation in metamaterials | Best Researcher Award

PhD, Purdue University, United States

Somraj Sen is a dedicated researcher and PhD student at Purdue University’s School of Mechanical Engineering, specializing in wave propagation, structural dynamics, and metamaterials. With a strong academic foundation, including an MS(Research) from IIT Delhi and a B.Tech from IIEST Shibpur, Somraj has demonstrated excellence in both theoretical and applied research. His work focuses on advanced computational methods, vibration control, and the design optimization of 2D lattice metamaterials. Passionate about innovation, Somraj has contributed to several high-impact journal articles and received prestigious awards for his innovative designs and research contributions.

Professional Profile

Education 🎓

Somraj Sen is currently pursuing a PhD in Mechanical Engineering at Purdue University (2024–ongoing) with a perfect CGPA of 4/4. He completed his MS(Research) in Civil Engineering at IIT Delhi (2022–2024) with a CGPA of 10/10, focusing on wave propagation in metabeams and 2D lattices. Earlier, he earned his B.Tech in Civil Engineering from IIEST Shibpur (2018–2022) with a CGPA of 9.04/10, where his thesis explored model reduction techniques for dynamic systems. His academic journey reflects a strong foundation in engineering and a passion for advanced research.

Experience 🔬

Somraj has extensive research experience in wave propagation, structural dynamics, and metamaterials. During his MS, he developed spectral element formulations for space frame elements and investigated bandgap characterization in beams with geometric modulations. His bachelor’s thesis focused on model reduction techniques for dynamic systems. He has also interned at IIT Delhi and IIEST Shibpur, working on Bayesian model updating and second-order instability effects on RC bridge columns. His expertise spans MATLAB, COMSOL, and finite element analysis, making him a versatile researcher.

Awards and Honors �

Somraj has been recognized for his innovative contributions to engineering. In 2021, he won the first prize in the National Civil/Structural Engineering Students Award Competition for designing an iconic steel roof structure. In 2020, he secured the second prize in Smart Traffic Systems at Build O’ Innovate 2020. These accolades highlight his creativity and problem-solving skills in structural engineering and design.

Research Focus 🔍

Somraj’s research focuses on wave propagation, structural dynamics, and metamaterials. He explores the behavior of 2D lattice metamaterials, spectral element methods, and finite element analysis. His work includes vibration control, uncertainty quantification, and design optimization. He investigates bandgap characterization, wave dispersion, and directional properties in complex geometries, aiming to advance the understanding of wave dynamics in engineered materials.

Publication Top Notes 📚

“Influence of geometry on in-plane and out-of-plane wave propagation of 2D hexagonal and re-entrant lattices” – Composite Structures (2025).
“Waves in beams with geometric modulations” – Journal of Sound and Vibration (Under Review).
“Waves in a bio-inspired gyroid cellular architectured metabeam” – Finite Elements in Analysis and Design (Under Review).
“Wave propagation through 2D lattices with thin-walled beams” – Thin-walled Structures (Submitted).

Conclusion 🌟

Somraj Sen is a highly accomplished researcher with a strong academic background and a passion for advancing the field of structural dynamics and metamaterials. His innovative research, coupled with his technical expertise and numerous accolades, positions him as a promising contributor to the engineering community. With a focus on wave propagation and design optimization, Somraj continues to push the boundaries of knowledge in mechanical and civil engineering.

Anietie Etim | Clean Fuels | Innovative Solutions for Environmental Challenges Award

Posted on 26/02/202526/02/2025 by ScienceFather

Dr Anietie Etim | Clean Fuels | Innovative Solutions for Environmental Challenges Award

Durban University of Technology, South Africa

Dr. Anietie Okon Etim is a distinguished Chemical Engineer specializing in renewable energy, sustainable fuels, and green catalysis. With a PhD from Durban University of Technology (2018-2022), an MSc from Obafemi Awolowo University (2013-2015), and a BSc from Nnamdi Azikiwe University (2004-2009), he has built a robust academic foundation. His research focuses on biomass conversion, waste recycling, and environmental sustainability. Dr. Etim is a postdoctoral researcher at Durban University of Technology, contributing to clean energy and biomass valorization. He is a member of prestigious organizations like SAICHE, NSE, and WSSET, and has received numerous awards, including the NRF postdoctoral fellowship. A prolific researcher, he has published extensively and presented at international conferences.

Professional Profile

Education 🎓

PhD Chemical Engineering, Durban University of Technology, South Africa (2018-2022)
MSc Chemical Engineering, Obafemi Awolowo University, Nigeria (2013-2015)
BSc Chemical Engineering, Nnamdi Azikiwe University, Nigeria (2004-2009)

Dr. Etim’s academic journey reflects his dedication to advancing sustainable energy solutions through innovative research and interdisciplinary collaboration.

Experience 💼

Postdoctoral Researcher, Durban University of Technology (2023–Present): Leading clean energy research, biomass valorization, and co-supervising students.
Research Assistant, Durban University of Technology (2020–2021): Conducted research on waste cooking oil decolorization.
Doctoral Researcher, Durban University of Technology (2018–2022): Explored advanced biomass liquid fuels and feedstock hybridization.
Master’s Researcher, Obafemi Awolowo University (2012–2015): Optimized biodiesel synthesis using heterogeneous catalysts.

His expertise spans green catalysis, process optimization, and bioenergy systems.

Awards and Honors 🏆

NRF Postdoctoral Fellowship Award (2023)
DUT Doctoral Training/Support Award (2022)
S&F-NRF-TWAS African Renaissance PhD Fellowship (2018–2021)
Invited speaker at global conferences like GSPEE2024, Catalysis Expo-2022, and Biofuels Meet 2022.

These accolades highlight his contributions to sustainable energy and environmental research.

Research Focus 🔬

Dr. Etim’s research focuses on:

Renewable energy and sustainable fuels 🌱
Biomass conversion to fuels and petrochemicals ⚙️
Waste recycling and bioenergy ♻️
Green catalysis and biosorbents �
Wastewater treatment and environmental pollution control 💧
Simulation, modeling, and optimization of bio-processing systems 📊

His work aims to address climate change and promote sustainable development.

Publication Top Notes 📚

Sustainable biodiesel production via biogenic catalyzed transesterification of baobab oil methyl ester and optimization process.
Synthesis of a highly efficient mesoporous green catalyst from waste avocado peels for biodiesel production.
Recursive Neural Network–Particle Swarm optimization of biodiesel from Hevea brasiliensis.
A novel green bio-composite catalyst for linseed-marula oil blend methyl ester production.
Evaluation of in-situ and ex-situ hybridization in transesterification of vegetable oils.
Optimization of flaxseed oil methyl ester synthesis using bio-alkaline catalyst.
Green heterogeneous catalyst from bicomponent biowaste for linseed oil methyl ester.
Potential of Carica papaya peels in transesterification of used vegetable oil.
Transesterification and optimization of marula seed oil methyl ester synthesis.
Effectiveness of biogenic waste-derived catalysts in biodiesel production.
Application of agricultural waste-based catalysts in biodiesel synthesis.
Potential of ripe plantain peels as an eco-friendly catalyst for biodiesel synthesis.

Conclusion 🌍

Dr. Anietie Okon Etim is a leading researcher in renewable energy and sustainable chemical engineering. His innovative work in biomass conversion, green catalysis, and waste valorization has significantly contributed to environmental sustainability. With numerous publications, awards, and international recognitions, Dr. Etim continues to drive advancements in clean energy and climate change mitigation. His dedication to research and education inspires future generations to pursue sustainable solutions for a greener planet.

Vedrine Louis | Damage Mechanics | Best Paper Award

Posted on 26/02/202526/02/2025 by ScienceFather

Mr Vedrine Louis | Damage Mechanics | Best Paper Award

Ens Paris Saclay, France

Louis Védrine is a dedicated researcher specializing in mechanics and material science, with a focus on snow and avalanche dynamics. Currently pursuing a PhD at the Centre d’Étude de la Neige/CNRM in Saint Martin d’Hères, France, Louis investigates the micro-scale mechanisms behind snow’s elasto-viscoplastic behavior. His academic journey includes a Master’s degree in Civil Engineering and extensive research experience at institutions like Météo France, EPFL, and ENS Paris-Saclay. Louis combines numerical modeling, experimental analysis, and fieldwork to address challenges in climate risks, structural safety, and natural hazard prevention. His work bridges theoretical research and practical applications, contributing to advancements in snow science and avalanche safety.

Professional Profile

Education 🎓

Louis Védrine holds a Master’s degree in Civil Engineering, with a focus on mechanics and material science. He is currently pursuing a PhD at the Centre d’Étude de la Neige/CNRM, where he studies the micro-scale mechanisms of snow’s elasto-viscoplastic behavior. His academic journey includes advanced studies at ENS Paris-Saclay and EPFL, where he developed expertise in numerical modeling, structural analysis, and natural hazard prevention. Louis’s education emphasizes interdisciplinary research, combining physics, engineering, and environmental science to address complex challenges in snow mechanics and avalanche dynamics.

Experience 💼

Louis Védrine has a diverse research background, including roles at Météo France, EPFL, and ENS Paris-Saclay. His PhD focuses on snow mechanics, while previous projects include improving snowpack models, studying avalanche dynamics, and developing tools for hydrogeological analysis. At EPFL, he researched the protective role of forests against avalanches, and at Météo France, he enhanced climate risk models. Louis also contributed to urban microclimate modeling at AREP and taught numerical methods at ENS Paris-Saclay. His work spans experimental, numerical, and field-based research, showcasing his versatility in addressing real-world challenges.

Research Focus 🔬

Louis Védrine’s research focuses on understanding the mechanical behavior of snow and its implications for avalanche dynamics and climate risks. His PhD investigates the micro-scale mechanisms behind snow’s elasto-viscoplasticity, combining experimental and numerical approaches. He also studies the interaction between avalanches and forests, aiming to improve natural hazard prevention. Additionally, Louis has contributed to structural safety research, exploring non-local damage models and size effects in materials. His interdisciplinary work bridges material science, environmental engineering, and natural hazard mitigation.

Publication Top Notes 📚

Calibration of non-local damage models from full-field measurements: Application to discrete element fields
Follow-up at the small scale during snow deformation. Microstructure evolution and local heterogeneities at various strain-rates.
Role of Ice Mechanics on Snow Viscoplasticity
Detrainment and braking of snow avalanches interacting with forests
Detrainment and braking of small to medium snow avalanches interacting with forests.
Detrainment and braking of snow avalanches interacting with forests

Conclusion 🌟

Louis Védrine is a passionate researcher whose work in snow mechanics and avalanche dynamics has significant implications for climate risk mitigation and natural hazard prevention. His interdisciplinary approach, combining experimental, numerical, and field-based research, highlights his commitment to advancing scientific understanding and practical solutions. Through his PhD and collaborative projects, Louis continues to contribute to the fields of material science, environmental engineering, and natural hazard management, making a lasting impact on both academia and society.

Komal Jabeen | Urban Hydrology | Best Researcher Award

Posted on 25/02/202525/02/2025 by ScienceFather

Ms Komal Jabeen | Urban Hydrology | Best Researcher Award

PhD Researcher, University of Genoa, Italy

Komal Jabeen is a dedicated environmental engineer and researcher specializing in fluid dynamics, urban hydrology, and nature-based solutions for climate resilience. With a PhD in Environmental Engineering from the University of Genoa, Italy, and a Gold Medalist MS in Environmental Sciences from the University of the Punjab, Pakistan, she has a strong academic foundation. Her research focuses on urban flood resilience, evapotranspiration, and groundwater sustainability. Komal is also an experienced educator, having worked as a Science Teacher and SST Subject Specialist in Pakistan. She is proficient in GIS, Python, and numerical modeling, and has presented her work at international conferences like EGU and ICUD.

Professional Profile

Education 🎓

Komal holds a PhD in Environmental Engineering from the University of Genoa, Italy (2022–present), focusing on urban hydrology and climatology. She earned her MS in Environmental Sciences (Gold Medalist) from the University of the Punjab, Pakistan (2016–2018), with a thesis on groundwater sustainability using GIS. Her BS in Environmental Sciences (2012–2016) from the same university involved primary data analysis of water and soil quality. She also holds a Masters in Education from Government College University, Faisalabad (2017–2019), with a focus on instructional leadership.

Experience 💼

Komal is currently a PhD Researcher at the University of Genoa, Italy (2022–present), working on urban flood resilience and nature-based solutions. Previously, she served as an SST Subject Specialist with the Federal Government Educational Institutes Directorate, Pakistan (2021–2022), and as a Science Teacher in Punjab, Pakistan (2017–2021). Her teaching experience spans secondary education, where she contributed to shaping school culture and professional learning communities.

Awards and Honors 🏆

Komal was awarded the Gold Medal for her MS in Environmental Sciences (2016–2018) at the University of the Punjab, Pakistan. She has also presented her research at prestigious conferences like EGU 2024 and ICUD-2024, showcasing her work on evapotranspiration and groundwater sustainability.

Research Focus 🔍

Komal’s research focuses on urban hydrology, climate resilience, and nature-based solutions. She investigates the role of vegetation in urban flood resilience, evapotranspiration in hydrologic restoration, and groundwater sustainability using numerical modeling. Her work also explores green roof hydrologic performance under future climate scenarios, contributing to sustainable urban planning.

Publication Top Notes 📚

Continuous Simulations for Predicting Green Roof Hydrologic Performance for Future Climate Scenarios
Using Numerical Modeling to Analyze the Groundwater Sustainability of Indus River Sub Basin Aquifer

Conclusion 🌱

Komal Jabeen is a passionate researcher and educator, blending her expertise in environmental engineering with a commitment to sustainable solutions. Her work in urban hydrology, climate resilience, and groundwater sustainability highlights her dedication to addressing pressing environmental challenges. With a strong academic background, teaching experience, and international research contributions, Komal is a valuable contributor to the field of environmental sciences. 🌍✨

Fatema Afrouse | Health sector | Best Researcher Award

Posted on 24/02/202524/02/2025 by ScienceFather

Mrs. Fatema Afrouse | Health sector | Best Researcher Award

Student, Jagannath University, Bangladesh

Fatema Afrouse Mili is an aspiring economist with a strong background in research and academia. She completed her Master of Social Science (MSS) in Economics from Jagannath University, Dhaka, with a commendable GPA of 3.51/4.00. Known for her excellent organizational skills and a passion for research, she has gained significant experience in research-based internships and roles at institutions like Cleverbee Research Ltd., Gaznobay, and Biztrade. Fatema has actively contributed to various research projects, including studies on food security, healthcare services, and chronic diseases in marginalized communities. Her involvement in international conferences like the BER International Economists’ Conference and SANEM Annual Economists’ Conference, along with publications in reputable journals, showcases her dedication to advancing economic research. Fatema also actively participates in extracurricular activities such as debates, volleyball, and social work, contributing to her well-rounded character.

Profie

Education

Fatema Afrouse Mili pursued her academic journey at Jagannath University, Dhaka, where she earned her Master of Social Science (MSS) in Economics in 2022, securing an impressive CGPA of 3.51 out of 4.00. Prior to that, she completed her Bachelor of Social Science (BSS) in Economics from the same institution, with a result of 3.38/4.00. Fatema’s educational foundation in Economics is solidified by her early academic achievements, including securing high marks in her Higher Secondary Certificate (HSC) and Secondary School Certificate (SSC) exams. Her educational background emphasizes her dedication to academic excellence and her deep interest in the field of economics, focusing on research and policy analysis. Fatema’s strong academic track record has provided her with the necessary tools to contribute to various fields of economic research and policy-making.

Experience

Fatema Afrouse Mili has accumulated significant experience through various research roles and internships. She worked as a Junior Executive at Cleverbee Research Ltd. from May 2024 to July 2024, where she honed her research and content development skills. Additionally, she gained hands-on experience during her internship at Biztrade in 2023, focusing on research, content, and capacity development. Fatema also served as a Research Associate at Gaznobay in 2021, contributing to research projects on topics such as ride-sharing, higher education quality, and food rationing. Her work in these positions allowed her to collaborate with experts and contribute valuable insights to various research projects. Moreover, Fatema has demonstrated her leadership and organizational skills through her active participation in conferences, seminars, and workshops, such as the BER International Economists’ Conference and SANEM’s Annual Economists’ Conference. These experiences have enhanced her knowledge and practical skills in economics and research.

Research Focus

Fatema Afrouse Mili’s research focus lies at the intersection of economics, public health, and development studies. Her most notable work includes research on the impact of food security and healthcare access on chronic disease risks, particularly among vulnerable populations such as Rohingya refugees in Bangladesh. This research is part of her broader interest in examining social inequalities, sustainable development, and poverty alleviation through the lens of economic policy. Fatema has also worked on topics like ride-sharing, food rationing, and higher education quality, all aimed at improving economic and social outcomes for marginalized communities. By addressing critical issues like healthcare access and food security, Fatema seeks to provide evidence-based solutions to pressing challenges. Her work aims to contribute to policy development and to bridge gaps in understanding the relationship between economic factors and public health in underprivileged regions.

Publication Top Notes

Examining the Impact of Food Security and Accessibility to Healthcare Services on Chronic Disease Risk Among Rohingya Refugees in Bangladesh (2025) 📰📚

Junqi Niu | Clinical Medicine | Best Researcher Award

Posted on 24/02/202524/02/2025 by ScienceFather

Prof Junqi Niu | Clinical Medicine | Best Researcher Award

Professor, First hospital of Jilin University, China

Niu Junqi is a distinguished professor and chief of the Department of Infectious Diseases at the First Hospital of Jilin University, China. With extensive experience in hepatology, his research focuses on Hepatitis B, Hepatitis C, liver fibrosis, and hepatocellular carcinoma. He has contributed significantly to the epidemiology and therapeutic clinical trials of chronic liver diseases. Over the years, he has held esteemed positions, including Vice President of the First Hospital at Jilin University. His work has earned him numerous national and provincial recognitions. With a prolific academic record, he has authored over 180 publications and accumulated thousands of citations. He continues to lead pioneering research in liver disease treatments, making substantial contributions to the medical field.

PROFESSIONAL PROFILE

EDUCATION 🎓

M.D. (1978-1982): Jilin Medical College, Jilin, China
M.S. (1985-1988): Norman Bethune University of Medical Sciences, Changchun, China
Ph.D. (1996-2000): Norman Bethune University of Medical Sciences, Changchun, China

EXPERIENCE 💼

1988-1992: Assistant Professor & Physician, Norman Bethune University of Medical Sciences
1992-1994: Visiting Fellow, Dept. of Medicine, St. Mary’s Hospital, Imperial College London, UK
1994-1997: Associate Professor & Consultant Physician, Dept. of Infectious Diseases, Norman Bethune University of Medical Sciences
1997-1999: Senior Visiting Fellow, University of Connecticut Health Center, USA
1999-Present: Professor & Chief, Dept. of Infectious Diseases, First Hospital, Jilin University
2001-2012: Vice President, First Hospital, Jilin University

AWARDS AND HONORS 🏆

2005: Top Creative Talent Award, Jilin Province
2008: Young Experts with Outstanding Contributions, China Ministry of Health
2009: Top Ten Famous Doctors of Jilin University
2010: Special Award of State Government
2011: Senior Expert Award, Jilin Province

RESEARCH FOCUS 🔬

Niu Junqi’s research revolves around Hepatitis B, Hepatitis C, hepatocellular carcinoma, liver fibrosis, and cirrhosis. His work includes epidemiological studies, treatment innovations, and clinical trials targeting chronic liver diseases, particularly non-alcoholic fatty liver disease. His research significantly contributes to improving diagnostic accuracy, disease management, and therapeutic strategies in hepatology.

PUBLICATION TOP NOTES 📑

Activation of immune checkpoint OX40 inhibits HBV replication in a mouse model
Role of Early On-Treatment Serum HBV RNA Declines in Predicting Hepatocellular Carcinoma Risk
Safety, Pharmacokinetics, and Antiviral Efficacy of Capsid Assembly Modulator Freethiadine
Diammonium Glycyrrhizinate Ameliorates Alcohol-Induced Liver Injury
Safety, Pharmacokinetics, and Antiviral Efficacy of GST-HG141 in Chronic Hepatitis B Patients
ELISA Genotyping of Hepatitis B Virus in China with Antibodies for Genotypes B and C
Exosomes Target HBV-Host Interactions to Remodel the Hepatic Immune Microenvironment
TIR8 Protects Against Nonalcoholic Steatohepatitis by Reducing Lipotoxicity and Inflammation
High-Accuracy Model for HBsAg Loss in Long-Term Antiviral Therapy
System Analysis Identifies SOX7 as a Regulator of Hepatic Stellate Cell Activation

CONCLUSION

Niu Junqi is a leading expert in hepatology, with vast contributions to Hepatitis B & C research, liver disease treatment, and clinical trials. His pioneering work in liver fibrosis and hepatocellular carcinoma continues to shape the field, advancing both diagnosis and therapeutic strategies. With numerous awards, extensive experience, and impactful research, he remains a key figure in infectious disease and hepatology studies.

Hang Xu | Mechanical Engineering | Best Researcher Award

Posted on 24/02/202524/02/2025 by ScienceFather

Dr Hang Xu | Mechanical Engineering | Best Researcher Award

Assistant Professor, Concordia University, Canada

Dr. Hang Xu is an Assistant Professor in the Department of Mechanical, Industrial, and Aerospace Engineering at Concordia University, Montreal, Canada. With a Ph.D. in Mechanical Engineering from McGill University and an MSc in Aircraft Design from Beijing University of Aeronautics and Astronautics, Dr. Xu specializes in mechanical metamaterials, aerospace structures, soft robotics, and composite materials. His research focuses on developing advanced materials with programmable morphing and motion for applications in aerospace, sensors, actuators, and medical devices. Prior to joining Concordia, he held research positions at Imperial College London, Siemens Canada, and McGill University. Dr. Xu is recognized for his contributions to materials science and engineering, earning awards such as the Best Presentation Award at CSME/CFD2024 and the Teaching Excellence Award at Concordia University.

Professional Profile