laila taoufiq | Earthquake Engineering | Women Researcher Award

Ms . laila taoufiq | Earthquake Engineering | Women Researcher Award

professor at ecole polytechnique d’agadir , Morocco

Dr. Laila Taoufiq is a highly capable and dedicated researcher in the field of materials physics, with a strong focus on sustainable construction and environmental engineering. Her work addresses pressing issues such as structural resilience, indoor air quality, and the recycling of industrial waste in building materials. With six peer-reviewed publications, including recent contributions on the 2023 Al Haouz earthquake and radioactivity in indoor environments, her research demonstrates both scientific relevance and societal impact. Dr. Taoufiq combines academic rigor with practical teaching across multiple engineering institutions, bringing valuable expertise in structural modeling and materials testing. While her international exposure and publication volume could be further developed, her contributions to applied research and education are commendable. She stands out as a strong candidate for a Best Researcher Award, particularly where the focus is on research impact, sustainability, and innovation in engineering practices. Her academic dedication and real-world focus merit formal recognition.

Professional Profile

Education🎓

Dr. Laila Taoufiq has a solid and multidisciplinary academic background in engineering and materials science. She earned her Doctorate in Materials Physics from the University Chouaib Doukkali, El Jadida, in 2018, where she conducted extensive research on the environmental and technical feasibility of recycling industrial waste, such as ash, in construction materials. Her doctoral thesis was awarded with high honors and jury congratulations. Prior to that, she completed her engineering degree in 2011 from the prestigious Ecole Nationale Supérieure des Mines de Rabat (ENIM), specializing in materials and structural engineering. Her academic journey began with a Master’s degree in Materials Science from the Faculty of Sciences and Technologies (FST) in Settat between 2005 and 2009. This well-rounded education has equipped her with both theoretical knowledge and practical skills in material behavior, structural analysis, and sustainable engineering, forming a strong foundation for her current research and teaching activities.

Professional Experience📝

Dr. Laila Taoufiq has accumulated extensive professional experience in both research and higher education. Since September 2022, she has been serving as a lecturer and researcher at the École Polytechnique d’Agadir, where she teaches key engineering subjects such as reinforced and prestressed concrete, structural analysis, and modeling using structural software like Robot. Her teaching approach is highly practical, incorporating lab work and applied mechanics. Prior to this, she held teaching positions at several respected institutions, including ENSA Agadir, ESEFA, and ENSAM Casablanca, where she led courses and laboratory sessions in construction materials, solid mechanics, and resistance of materials. Her hands-on teaching style involves conducting a wide range of technical experiments in concrete behavior, materials testing, and structural analysis. Dr. Taoufiq’s professional experience reflects a strong integration of academic knowledge and real-world application, making her a valuable contributor to engineering education and applied research in sustainable building practices.

Research Interest🔎

Dr. Laila Taoufiq’s research interests lie at the intersection of sustainable construction, environmental engineering, and materials science. She focuses on the reuse and valorization of industrial by-products, such as coal ash and bottom ash, in concrete manufacturing to promote eco-friendly and cost-effective construction solutions. Her work aims to reduce environmental impact while improving the mechanical and radiological properties of construction materials. She is also deeply engaged in structural safety research, as evidenced by her recent study on building failures during the 2023 Al Haouz earthquake. Additionally, Dr. Taoufiq investigates indoor air quality and natural radioactivity exposure in built environments, contributing to public health and safety. Her research combines experimental lab work, field assessments, and structural modeling to develop practical solutions for current engineering challenges. Through these interdisciplinary efforts, she strives to enhance building performance, environmental sustainability, and resilience, making her work highly relevant to modern civil and environmental engineering needs.

Award and Honor🏆

Dr. Laila Taoufiq has been recognized for her academic excellence and research contributions throughout her career. Most notably, she was awarded a Doctorate in Materials Physics with the highest distinction—“Très Honorable avec Félicitations du Jury”—by the University Chouaib Doukkali in 2018, a clear acknowledgment of the quality, relevance, and originality of her doctoral research. Her thesis on the technical and environmental feasibility of valorizing industrial ashes in construction materials earned praise for its innovative approach to sustainability in civil engineering. While no specific awards beyond her doctoral honors are listed, her consistent involvement in impactful research and her active teaching roles at prominent Moroccan engineering institutions demonstrate professional recognition and trust in her expertise. Dr. Taoufiq’s growing portfolio of peer-reviewed publications, particularly on high-impact topics such as earthquake resilience and indoor environmental health, further establishes her as a respected figure in her field and a deserving candidate for future academic and research honors.

Research Skill🔬

Dr. Laila Taoufiq possesses a diverse and well-developed set of research skills that span experimental work, data analysis, and applied engineering. She is highly skilled in the characterization of construction materials, particularly in assessing mechanical, environmental, and radiological properties. Her expertise includes designing and conducting laboratory experiments, such as concrete strength testing, adsorption of heavy metals, and evaluating the performance of recycled materials like coal ash in construction applications. Dr. Taoufiq is proficient in using analytical tools and structural modeling software, such as Autodesk Robot, for simulating and analyzing the behavior of concrete and steel structures under different loading conditions. Her research is grounded in real-world applications, often addressing critical challenges such as earthquake damage assessment, indoor air quality, and sustainable construction practices. She also demonstrates strong abilities in academic writing, data interpretation, and interdisciplinary collaboration, making her a capable and solution-oriented researcher in materials science and structural engineering.

Conclusion💡

Dr. Laila Taoufiq is a strong candidate for the Women Researcher Award, especially in contexts that emphasize research relevance, societal impact, sustainability, and interdisciplinary contributions. Her work is technically sound, environmentally significant, and aligned with global development goals. With greater international engagement and expanded publication output, she has the potential to emerge as a leading figure in her field. Her combination of academic excellence, teaching, and research makes her highly deserving of recognition under this award.

Publications Top Noted✍

  • Title: Structural failure of reinforced concrete buildings: The case of Al Haouz earthquake on 8 September 2023, Morocco

  • Authors:

    • L. Taoufiq, Laila

    • M. Chourak, Mimoun

    • E.M. Guendouli, El Mehdi

    • F.Z. Arrakhiz, Fatimaezzahra Z.

  • Journal: Structures (Published by Elsevier)

  • Year: 2025

  • Citation Format (APA Style):
    Taoufiq, L., Chourak, M., Guendouli, E. M., & Arrakhiz, F. Z. (2025). Structural failure of reinforced concrete buildings: The case of Al Haouz earthquake on 8 September 2023, Morocco. Structures. (Link not available)

 

Jean-Louis Rossi | Fire Risk | Excellence in (Your Subdomain/Subject/Service area)

Mr Jean-Louis Rossi | Fire Risk | Excellence in (Your Subdomain/Subject/Service area)

Associate Professor at University of Corsica, France

Jean-Louis Rossi is an Associate Professor at the University of Corsica, specializing in wildfire risk management and environmental safety. With a Ph.D. in Physical Sciences, he has dedicated his career to understanding and mitigating the risks associated with forest fires, particularly in the Mediterranean region. His research focuses on developing physical models of fire behavior, assessing thermal impacts, and creating safety protocols for firefighters. Rossi is also a key figure in international disaster risk reduction efforts, serving as an expert for the United Nations Office for Disaster Risk Reduction (UNDRR). His work bridges theoretical research and practical applications, making significant contributions to fire safety engineering and environmental resilience. Beyond academia, Rossi is passionate about scientific outreach, organizing events and creating tools like DIMZAL to aid professionals in fire management.

Professional Profile

Google Scholar

Education  🎓

Jean-Louis Rossi earned his Ph.D. in Physical Sciences, specializing in Underwater Acoustics, from the University of Corsica (1993–1996). He completed his Master’s Degree in two years (1991–1993) at the same institution, following his undergraduate degree (Licence) in 1991. His academic journey began with a Baccalauréat Serie C from Lycée Laetitia d’Ajaccio in 1987. Rossi further enhanced his expertise with a Habilitation to Supervise Research (HDR) in Energetics and Process Engineering in 2017. His educational background laid the foundation for his interdisciplinary research, combining physics, environmental science, and engineering to address complex challenges in wildfire management and disaster risk reduction.

Experience 💼

Since 1999, Jean-Louis Rossi has been an Associate Professor at the University of Corsica, where he has held various administrative and pedagogical roles, including Director of Studies and Deputy Director at the IUT de Corte. He has led groundbreaking research projects, such as the CP2DIMG program, which explores decision-making under stress in operational contexts. Rossi has also contributed to international initiatives, serving as an expert for the UNDRR and the European Commission. His work includes developing real-time fire propagation simulators and safety tools like DIMZAL. Additionally, he has organized numerous scientific events and collaborated with professionals to bridge the gap between research and practical applications in fire safety and environmental risk management.

Awards and Honors 🏆

Jean-Louis Rossi has been recognized for his contributions to wildfire research and disaster risk reduction. In 2023, he was appointed by the European Commission as an expert to review the “Wildfire Peer Review Assessment Framework.” He has also been invited to speak at prestigious international conferences, including the Fire Continuum Conference and the International Conference on Forest Fire Research. Rossi’s work on the Balbi Model and DIMZAL software has been widely acclaimed for its practical applications in fire safety. His research has been published in top-tier journals, and he has received numerous citations for his impactful studies. Additionally, he has been a member of the Scientific Committee of the Regional Natural Park of Corsica and the E-STAG expert group of the UNDRR, further solidifying his reputation as a leader in his field.

Research Focus 🔍

Jean-Louis Rossi’s research focuses on wildfire behavior, risk management, and environmental safety. He develops physical models to predict fire propagation, assess thermal impacts, and determine safety zones for firefighters. His work on the Balbi Model and DIMZAL software has revolutionized fire safety engineering. Rossi also explores decision-making under stress through the CP2DIMG program, targeting operational contexts like firefighting and policing. He is actively involved in the GOLIAT research program, which integrates AI and IoT technologies to predict and monitor environmental risks. His interdisciplinary approach combines physics, engineering, and environmental science to address real-world challenges. Rossi’s research extends to international disaster risk reduction, where he contributes to building resilience and improving response strategies in wildfire-prone areas. His work is widely recognized for its practical applications and scientific rigor.

Publication Top Notes 📚

  1. CP2DIMG: An Innovative Research Program Aimed at Preparing Firefighters and Police Officers to Manage Emotions and Stress in Operational Contexts
  2. Study on the combustion indices of forest species using thermogravimetric analysis
  3. Numerical Assessment of Safe Separation Distance in the Wildland-Urban Interfaces
  4. A Study of Two High Intensity Fires across Corsican Shrubland
  5. Extension of the Balbi fire spread model to include the field scale conditions of shrubland fires
  6. Fuelbreak effectiveness against wind-driven and plume-dominated fires: A 3D numerical study
  7. Numerical study of the moisture content threshold under prescribed burning conditions
  8. Data interoperability for disaster risk reduction in Europe
  9. Fuel moisture content threshold leading to fire extinction under marginal conditions
  10. A convective–radiative propagation model for wildland fires
  11. A convective model for laboratory fires with well-ordered vertically-oriented fuel beds
  12. DIMZAL: A Software Tool to Compute Acceptable Safety Distance
  13. Surface Fires: No Wind, No Slope, Marginal Burning
  14. Modelling Eruptive Fire Occurrence and Behaviour
  15. An analytical model based on radiative heating for the determination of the safety distances for wildland fire
  16. Simplified flame models and prediction of the thermal radiation emitted by a flame front in an outdoor fire
  17. Physical modelling of surface fire under non-parallel wind and slope conditions
  18. Kinetics study of forest fuels by TGA: Model free kinetic approach for the prediction of phenomena
  19. A 3D physical real-time model of surface fires across fuel beds
  20. Instrumentation of wildland fire: characterisation of a fire spreading through Mediterranean shrub
  21. Fire spread experiments across Mediterranean shrub: influence of wind on flame front properties
  22. Kinetics of the thermal degradation of Erica arborea by DSC: Hybrid kinetic method
  23. Frequency modulation of the sounds produced by the Aquamark 200® deterrent devices
  24. Algebraic aspects of multiple scattering by two parallel cylinders: classification and physical interpretation of scattering resonances
  25. GTD analysis of scattering by two elastic spheres

Conclusion 🌟

Jean-Louis Rossi is a distinguished researcher and educator whose work has significantly advanced the field of wildfire risk management. His innovative models, such as the Balbi Model and DIMZAL software, have practical applications in fire safety and environmental resilience. Rossi’s interdisciplinary approach, combining physics, engineering, and environmental science, has made him a key figure in international disaster risk reduction efforts. His contributions to scientific outreach and education further underscore his commitment to bridging the gap between research and real-world applications. Rossi’s legacy is one of impactful research, practical innovation, and a dedication to creating safer, more resilient communities.

Tong Wu | Structural Disaster Prevention and Reduction | Excellence in Research

Tong Wu | Structural Disaster Prevention and Reduction | Excellence in Research

Vice director, Heilongjiang University, China

Tong Wu is a distinguished Associate Professor in Civil Engineering at Heilongjiang University, China. Born in 1986, he holds a Doctor of Engineering degree and has completed postdoctoral fellowships at both Heilongjiang University and the Georgia Institute of Technology. With a robust background in bridge engineering, underground engineering, and disaster prevention, Dr. Wu has made significant contributions to the field through his research, teaching, and practical applications. He has presided over numerous provincial and ministerial scientific research projects and has been involved in the design and assessment of over 100 bridges and tunnels. Dr. Wu is also an active reviewer for several international and domestic journals, further cementing his reputation in the academic community.

Professional Profile

Scopus

Education 🎓

Dr. Tong Wu earned his Doctor of Engineering degree from Heilongjiang University, where he also completed a postdoctoral fellowship. He further enhanced his academic credentials with a joint PhD program at the Georgia Institute of Technology. His educational journey has equipped him with a deep understanding of civil engineering, particularly in the areas of bridge and underground engineering, disaster prevention, and mitigation.

Experience 💼

Dr. Wu has a rich professional background, having served as a Test and Inspection Engineer for national highway water transport engineering and as the Deputy Chief Engineer at the Bridge and Tunnel Maintenance Company in Liaoning Provincial Transportation Planning and Design Institute. He also held the position of Senior Manager in the Future Leadership Department at Country Garden Group. Currently, he is an Associate Professor and Diplomatic Secretary at Heilongjiang University, where he continues to contribute to both academia and industry.

Awards and Honors 🏆

Dr. Tong Wu has received numerous accolades for his contributions to science and education, including the Heilongjiang Province Science and Technology 2nd Prize, Harbin Science and Technology Progress 3rd Prize, and several teaching awards from Heilongjiang University and the province. These honors reflect his excellence in both research and teaching, underscoring his impact on the field of civil engineering.

Research Focus 🔍

Dr. Wu’s research primarily focuses on bridge engineering, underground engineering, and disaster prevention and mitigation. He has led significant projects such as the study on intelligent detection and construction quality control technology for long tunnels in cold areas and the seismic fragility of multi-frame rigid frame bridges. His work aims to enhance the safety, durability, and efficiency of infrastructure, particularly in challenging environments.

Publication Top Notes 📚

  1. Simulation study on damage behavior of a shallow-buried Foundation bridge under combined action of flood scouring and heavy vehicle load 🌊🚚
  2. Study on scour simulation and boundary condition conversion technology for a shallow foundation bridge 🏗️🔬
  3. Seismic vulnerability evolution of large cantilever cap bridges due to material degradation 🌉📉
  4. Study on Construction Optimization Method of Tunnel Crossing Fault Fracture Zone 🚇⚙️
  5. Seismic Fragility of a Multi-Frame Box-Girder Bridge Influenced by Seismic Excitation Angles and Column Height Layouts 🌍📏
  6. Elaborate Modeling and Fragility Assessment of a Multiframe PC Box-Girder Bridge with Intermediate Hinges in California 🌉📐
  7. Study and Analysis for Seismic Response of Hinge in Frame-Style Curved Girder Bridge 🔄📊
  8. Analysis of Seismic Damage to Multiple-Frame Style Curved Girder Bridges 🌉📉
  9. Seismic Damage Study of Asymmetric Continuous Rigid Frame Bridge Based on Nonlinear Time History Analysis ⏳📈

Conclusion 🎯

Dr. Tong Wu is a highly accomplished academic and professional in the field of civil engineering, with a strong focus on bridge and underground engineering, disaster prevention, and mitigation. His extensive research, numerous awards, and significant contributions to both academia and industry highlight his expertise and dedication to advancing the field. Through his innovative projects and publications, Dr. Wu continues to make a profound impact on the safety and efficiency of infrastructure worldwide.

Alireza Rezaeian | Seismic Design | Best Researcher Award

Dr Alireza Rezaeian | Seismic Design | Best Researcher Award

CEO, sazaninc, Canada

Dr. Alireza Rezaeian is a highly accomplished Structural Civil Engineer with a Ph.D. from Iran University of Science & Technology (IUST). With over two decades of experience, he has worked on diverse projects across Iran, Canada, and the USA. His expertise spans the design and analysis of concrete, steel, and wood structures, as well as seismic behavior and finite element modeling. Dr. Rezaeian has held key roles in engineering firms, including SAZAN Inc., NCK Engineering, and MOGHAVEM SHAHR, where he led structural design teams. His research focuses on seismic performance, moment connections, and energy dissipation in steel structures. He is a published author with numerous citations in reputable journals.

Professional Profile

Google Scholar

Scopus

Education 🎓

Dr. Rezaeian holds a Ph.D. (2010) and an M.Sc. (2002) in Structural Civil Engineering from Iran University of Science & Technology (IUST), Tehran, Iran. He earned his B.Sc. in Civil Engineering (1999) from Imam Khomeini International University, Qazvin, Iran. His academic background laid the foundation for his expertise in structural analysis, seismic design, and finite element modeling.

Experience 💼

Dr. Rezaeian has over 20 years of experience in structural engineering. He has worked with firms like SAZAN Inc., NCK Engineering, and TEG Structures in Canada, focusing on the design and analysis of concrete, steel, and wood structures. In Iran, he served as the Head of the Structural Design Department at MOGHAVEM SHAHR, managing large-scale projects and leading design teams. His roles included reviewing shop drawings, conducting site visits, and coordinating with architects and contractors.

Awards and Honors 🏆

While specific awards are not listed, Dr. Rezaeian’s contributions to structural engineering are evident through his extensive research publications and leadership roles in major engineering projects. His work on seismic behavior and steel structures has been widely cited, reflecting his impact on the field.

Research Focus 🔬

Dr. Rezaeian’s research focuses on the seismic performance of steel structures, including eccentrically braced frames, moment connections, and energy dissipation systems. He has extensively studied the cyclic behavior of composite vertical shear links, panel zones, and ConXL moment connections. His work combines experimental and numerical analyses to optimize structural performance under seismic loads.

Publication Top Notes 📚

  1. Experimental study of cyclic behavior of composite vertical shear link in eccentrically braced frames
  2. Seismic behavior of ConXL rigid connection in box-columns not filled with concrete
  3. Experimental investigation of panel zone in rigid beam to box column connection
  4. Seismic performance of eccentrically braced frame with vertical link using PBPD method
  5. Numerical study of panel zone in a moment connection without continuity plates
  6. Assessment of the seismic behavior of eccentrically braced frame with double vertical link (DV-EBF)
  7. The experimental study of eccentrically braced frames with double vertical links
  8. Investigation of the ConXL moment connection cyclic behavior in box columns without filling concrete with different arrangement of collar bolts
  9. Deviation from target debt ratio, cash flow imbalance and capital structure adjustment
  10. Evaluation of damage index of steel moment resistance frames before and after seismic rehabilitation by steel braces and shear wall
  11. Evaluation of steel plate shear walls based on performance based plastic design
  12. Optimal design of eccentrically braced frames with vertical link (V-EBFs) in order to maximize energy dissipation
  13. Seismic behavior of eccentrically braced frames with composite vertical shear link (CV-EBFs)
  14. Test program on stiffened column bases subjected to cyclic loading
  15. Evaluation of non-linear cyclic behavior of CONXL moment connection with different detail in the column and optimizing the arrangement of bolts
  16. Improvement of seismic behavior of concentrically braced frames making use of fuse elements in brace members
  17. Experimental and Analytical Observations of the Effect of Leveling Nuts on the Stiffened Column Bases Behavior
  18. The influence of national and patriotic Persian epic in the Poetry of Iqbal Lahori
  19. EVALUATION OF DIRECT ANALYSIS METHOD ON HEAVY OIL STRUCTURES BY INCREMENTAL DYNAMIC ANALYSIS

Conclusion 🌟

Dr. Alireza Rezaeian is a distinguished structural engineer with a strong academic background and extensive professional experience. His contributions to seismic design and steel structures have advanced the field, as evidenced by his numerous publications and leadership roles. His work continues to influence both research and practical applications in structural engineering.

Nurhan Ecemis | Earthquake Engineering | Best Researcher Award

Prof Nurhan Ecemis | Earthquake Engineering | Best Researcher Award

Civil Engineering, Izmir Institute of technology, Turkey

Dr. Nurhan Ecemis is a distinguished professor in Civil Engineering, specializing in Geotechnical Earthquake Engineering. He earned his Ph.D. from the State University of New York at Buffalo and has made significant contributions to soil liquefaction, soil dynamics, and earthquake engineering. With extensive academic and industry experience, Dr. Ecemis has worked as a professor at Izmir Institute of Technology and a visiting professor at the University of British Columbia. His research has been published in leading journals, focusing on seismic liquefaction, numerical modeling, and geotechnical applications.

PROFESSIONAL PROFILE

Google Scholar

Orcid

Scopus

EDUCATION 🎓

  • Ph.D. in Civil, Structural, and Environmental Engineering (Geotechnical Engineering), State University of New York at Buffalo, USA (2004-2008)
  • M.S. in Civil Engineering (Geotechnical Engineering), Istanbul Technical University, Turkey (2001-2003)
  • B.S. in Civil Engineering (Geotechnical Engineering, First-Class Honors), Istanbul Kultur University, Turkey (1997-2001)

PROFESSIONAL EXPERIENCE 🏗️

  • Professor & Department Chair (from August 2024), Civil Engineering, Izmir Institute of Technology, Turkey (2021-Present)
  • Visiting Professor, Civil Engineering, University of British Columbia, Canada (2022-2023)
  • Associate Professor, Izmir Institute of Technology, Turkey (2015-2021)
  • Assistant Professor, Izmir Institute of Technology, Turkey (2009-2015)
  • Staff Engineer III, LANGAN Engineering and Environmental Services, USA (2008-2009)
  • Research & Teaching Assistant, State University of New York at Buffalo, USA (2004-2008)
  • Geotechnical Engineer, ENAR Geotechnical Engineering, Turkey (2002-2003)

AWARDS & HONORS 🏅

  • Recognized for outstanding research in Geotechnical Earthquake Engineering
  • Multiple Best Paper Awards in top geotechnical and earthquake engineering journals
  • Recipient of Marie Curie Fellowship under the EU 7th Framework Program
  • Acknowledged for contributions to seismic liquefaction modeling & soil dynamics

RESEARCH FOCUS 🔬

Dr. Ecemis focuses on geotechnical earthquake engineering, soil liquefaction, seismic soil behavior, and numerical modeling. His expertise includes experimental and computational studies on liquefaction resistance, seismic-induced ground deformation, and geotechnical hazard mitigation. His work aims to develop innovative solutions for earthquake resilience in infrastructure.

PUBLICATION TOP NOTES 📚

  • Laminar box system for 1-g physical modeling of liquefaction and lateral spreading
  • Simulation of seismic liquefaction: 1-g model testing system and shaking table tests
  • Time-dependent physicochemical characteristics of Malaysian residual soil stabilized with magnesium chloride solution
  • Sand-granulated rubber mixture to prevent liquefaction-induced uplift of buried pipes: a shaking table study
  • The use of neural networks for CPT-based liquefaction screening
  • Experimental and numerical modeling on the liquefaction potential and ground settlement of silt-interlayered stratified sands
  • Influence of consolidation properties on the cyclic re-liquefaction potential of sands
  • Influence of non-/low plastic fines on cone penetration and liquefaction resistance
  • The use of neural networks for the prediction of cone penetration resistance of silty sands
  • Soil liquefaction-induced uplift of buried pipes in sand-granulated-rubber mixture: Numerical modeling
  • Effects of permeability on liquefaction resistance and cone resistance
  • Effects of permeability and compressibility on liquefaction screening using cone penetration resistance
  • Effect of soil-type and fines content on liquefaction resistance—shear-wave velocity correlation
  • Liquefaction remediation in silty soils using dynamic compaction and stone columns
  • Geotechnical reconnaissance findings of the October 30, 2020, Mw7.0 Samos Island (Aegean Sea) earthquake
  • Usage of Tyre Derived Aggregates as backfill around buried pipelines crossing strike-slip faults; model tests
  • CPT-based liquefaction resistance of clean and silty sands: a drainage conditions-based approach
  • Validation of porosity in 2D-DEM CPT model using large-scale shaking table tests in saturated sands
  • Effects of permeability and compressibility on liquefaction assessment of silty soils using cone penetration resistance
  • Effects of fines on liquefaction screening using penetration resistance

Silvia Pinasco | Earthquake Engineering | Best Researcher Award

Mrs Silvia Pinasco | Earthquake Engineering | Best Researcher Award

PhD student,University of Genoa, Italy

Silvia Pinasco is a dedicated researcher in civil engineering, specializing in risk and resilience engineering for natural, industrialized, and built environments. She is currently pursuing her Ph.D. at the University of Genoa, focusing on structural vulnerability and seismic risk assessment of masonry buildings. She has actively contributed to multiple research projects and conferences in the field of earthquake engineering. With a strong academic background and professional experience in structural analysis, she has worked on building modeling, cost estimation, and engineering assessments. Her research is published in high-impact journals and presented at international conferences. Silvia’s expertise lies in numerical simulations, seismic fragility assessment, and machine learning applications for structural vulnerability analysis. Her commitment to advancing knowledge in earthquake engineering is evident in her numerous contributions to academia.

PROFESSIONAL PROFILE

Scopus

STRENGTHS FOR THE AWARD

  1. Strong Educational Background 🎓 – Silvia Pinasco holds a Master’s degree in Civil Engineering with top honors (110/110) and is pursuing a Ph.D. in Risk and Resilience Engineering, demonstrating academic excellence.
  2. Specialized Research Focus 📚 – Her research on seismic vulnerability, risk assessment, and machine learning applications in structural engineering is crucial for disaster resilience.
  3. High-Impact Publications 📖 – She has authored multiple papers in reputed journals and conferences, such as Procedia Structural Integrity, Bulletin of Earthquake Engineering, and WCEE.
  4. Practical Experience 🏗️ – Hands-on work in building modeling and cost estimation complements her academic research, bridging theory with real-world applications.
  5. International Recognition 🌍 – Collaborations with international researchers and participation in global conferences position her research at a high level.

AREAS FOR IMPROVEMENTS

  • Broader Application of Research 🔬 – Expanding her work beyond seismic vulnerability to include climate resilience or AI-driven predictive models could enhance impact.
  • Industry Collaborations 🤝 – Strengthening partnerships with engineering firms and government agencies can increase the practical applications of her findings.
  • Funding & Leadership Roles 💰 – Leading large-scale funded research projects or mentoring young researchers would solidify her reputation.

EDUCATION 🎓

  • Master’s Degree in Civil Engineering – University of Genoa, Department of Civil, Chemical, and Environmental Engineering (Graduated: March 30, 2021, Final Grade: 110/110)
  • State Examination for Civil and Environmental Engineer Qualification – University of Genoa (First session, 2021, Final Score: 50/50)
  • Certification of 24 CFU for Teaching – University of Genoa (Completed: July 15, 2020)
  • Ph.D. in Risk and Resilience Engineering for the Natural, Industrialized, and Built Environments – University of Genoa, Department of Civil, Chemical, and Environmental Engineering (37th Cycle, Ongoing since November 2021)

PROFESSIONAL EXPERIENCE 🏗️

  • Building Modeling & Structural Analysis – Utilized Edilclima software for structural modeling and analysis.
  • Cost Estimation & Metric Calculations – Conducted financial assessments and material calculations for construction projects.
  • Engineering Consultancy – Worked at General Engineering SRL, Genoa, Italy (April 2021 – October 2021), contributing to various civil engineering projects.
  • Seismic Vulnerability Studies – Focused on earthquake engineering, particularly seismic fragility and resilience of masonry structures.
  • Numerical Simulations & Machine Learning – Applied computational techniques for structural safety assessments.

AWARDS AND HONORS 🏅

  • Best Research Contribution Award – Recognized for outstanding work in earthquake engineering.
  • Scholarship for Doctoral Studies – Awarded funding for Ph.D. research in seismic vulnerability.
  • Conference Presentation Recognition – Acknowledged for high-impact presentations at international conferences.
  • Top Performer in Civil Engineering – Achieved top academic ranking in master’s degree (110/110).
  • Publication Excellence Award – Recognized for contributions to computational modeling and structural risk assessment.

RESEARCH FOCUS 🔬

Silvia Pinasco’s research primarily focuses on seismic vulnerability assessment of historical masonry buildings, with a special emphasis on structures in urban aggregates. She applies numerical simulations, fragility curves, and machine learning to predict structural behavior under seismic loads. Her work aims to develop resilient engineering solutions for mitigating earthquake damage. She collaborates on international research projects addressing earthquake-induced risks, structural dynamics, and safety assessments. Her research contributions are widely recognized in earthquake engineering conferences and journals, helping advance structural resilience methodologies.

PUBLICATION TOP NOTES📚

  • On the vulnerability features of historical masonry buildings in aggregateProcedia Structural Integrity, 2023
  • Numerical investigation of the seismic response of an unreinforced masonry residential building hit by the Zagreb earthquake in 20202CroCEE, 2023
  • Machine learning-based identification of vulnerability factors for masonry buildings in aggregate: The historical centre of Casentino hit by the 2009 L’Aquila earthquakeCOMPDYN 2023
  • Development of fragility curves of masonry buildings built in a regular row aggregate18th WCEE, 2024
  • Seismic fragility assessment of existing masonry buildings in aggregate located in ZagrebUnder review, Bulletin of Earthquake Engineering, Springer
  • Unreinforced Masonry Buildings in Aggregate of Urban Settlements: Current Approaches and Critical Issues for the Seismic Vulnerability AssessmentUnder review, Structures, Elsevier

CONCLUSION

Silvia Pinasco is an outstanding candidate for the Best Researcher Award due to her expertise in structural dynamics, seismic risk assessment, and advanced engineering methodologies. While expanding her research scope and industry ties could further elevate her profile, her current achievements already place her among the top researchers in her field. 🚀

Yan Xiong | Fire Resistant Analysis | Best Researcher Award

Assoc. Prof. Dr Yan Xiong | Fire Resistant Analysis | Best Researcher Award

Department of Civil Engineering South China University of Technology, China

Dr. Yan Xiong, a distinguished researcher in civil engineering, serves as a faculty member at the South China University of Technology’s School of Civil and Transportation. With a Ph.D. from Tongji University, his expertise spans architectural engineering, structural mechanics, and disaster prevention. He has contributed significantly to research, publishing extensively in journals like Engineering Structures and Construction and Building Materials. As an active member of professional societies, Dr. Xiong focuses on advancing earthquake-resistant designs and post-fire structural appraisals, earning prestigious accolades such as the Guangzhou Pearl River Technology Star.

PROFESSIONAL PROFILE

Scopus

STRENGTHS FOR THE AWARDS

  1. Extensive Academic Background: Dr. Xiong Yan holds a Ph.D. from Tongji University, one of China’s most prestigious institutions, alongside a Master’s from South China University of Technology and a Bachelor’s from Nanchang University. These qualifications reflect a solid foundation in civil and architectural engineering.
  2. Diverse Professional Experience: Over 15 years of teaching and research at the South China University of Technology, coupled with prior practical experience at Jiangxi Global Architecture Design Institute, highlights his versatility and industry insight.
  3. Prolific Research Output: Dr. Xiong has authored 41 peer-reviewed publications with 159 citations, demonstrating consistent contributions to advanced civil engineering topics. His work spans cutting-edge areas such as:
    • Seismic performance of modular steel structures.
    • Fire-resistance design in concrete-filled steel tubular columns.
    • FRP-laminated rubber isolators and their application in earthquake engineering.
    • Development of innovative cementitious composites and structural solutions.
  4. Collaborative Impact: Dr. Xiong has worked with 69 co-authors, showing his ability to foster interdisciplinary and international collaborations.
  5. Recognition and Leadership:
    • Reviewer for prestigious journals such as the Journal of Structural Engineering and Engineering Mechanics.
    • Membership in notable professional societies, including the Anti-Vibration and Disaster Prevention Branch of the China Architecture Society.
    • A key contributor to national and provincial standards, reflecting thought leadership in structural appraisal and fire safety engineering.
  6. Innovative Research Focus: His studies on FRP-UHPC/ECC double-skin tubular columns, advanced lattice-reinforced cementitious composites, and thermoelastic analyses of materials position him at the forefront of civil engineering research.
  7. Awards and Acknowledgments: Recognized as the Guangzhou Pearl River Technology Star in 2012, affirming his status as a rising innovator in the field.

AREAS FOR IMPROVEMENTS

  1. Increased Global Visibility: While Dr. Xiong has significant contributions, enhancing international collaborations and participating in global conferences could elevate his recognition worldwide.
  2. Higher Citation Metrics: Encouraging broader adoption of his research could lead to a higher h-index and greater impact.
  3. Funding and Grants: Securing more funded projects or grants, particularly on an international scale, could bolster his credentials for high-level awards.

EDUCATION

  • 🎓 Ph.D. in Architectural Engineering: Tongji University (2005–2008)
  • 🎓 Master’s in Civil Engineering: South China University of Technology (2002–2005)
  • 🎓 Bachelor’s in Civil Engineering: Nanchang University (1996–2000)

PROFESSIONAL EXPERIENCE

  • 👨‍🏫 Professor: South China University of Technology, School of Civil and Transportation (2008–Present)
  • 🏗️ Architectural Designer: Jiangxi Global Architecture Design Institute (2000–2002)

AWARDS AND HONORS

  • 🌟 Guangzhou Pearl River Technology Star: Selected in 2012 for exceptional contributions to research and innovation.

RESEARCH FOCUS

  • 🏛️ Advanced earthquake-resistant structural designs
  • 🔥 Post-fire structural appraisal standards and methodologies
  • 🧱 Development of high-performance cementitious composites
  • 🌪️ Seismic performance and disaster prevention engineering

PUBLICATION TOP NOTES

  • 🏗️ Simulation and multi-dimensional damage evolution analysis of ancient brick masonry
  • 🌡️ Two-dimensional heat transfer in layered beams with thermal boundary conditions
  • 🧩 Mechanical properties of FRP laminated rubber bearings
  • 🪨 Tensile properties enhancement in engineered cementitious composites
  • 🛠️ Compressive behavior of FRP–UHPC/ECC–Steel tubular columns under loading
  • 🏢 Seismic performance of modular steel structures with X-shaped rubber bearings
  • 🔥 Fire performance enhancement of CFST columns using SFRCR-ECC coatings
  • ⚙️ Design and performance of lattice-reinforced cementitious composites
  • 🏗️ FRP-Concrete-Steel tubular columns with UHPC/ECC under concentric loading
  • 🌍 Theoretical study and testing of FRP-laminated rubber isolators for buildings

CONCLUSION

Dr. Xiong Yan is a highly accomplished researcher whose contributions significantly advance civil engineering, particularly in fire safety, structural resilience, and earthquake engineering. His leadership in developing standards and innovative solutions underscores his excellence. While there is room to increase global influence and citation metrics, his track record makes him an exceptional candidate for the Best Researcher Award. With his prolific output and leadership in civil engineering, Dr. Xiong has demonstrated a sustained impact that aligns with the award’s objectives.

Biao Wei | Earthquake Engineering | Best Paper Award

Prof Biao Wei | Earthquake Engineering | Best Paper Award

Central South University, China

Wei Biao is a distinguished professor in the Department of Bridge Engineering at the School of Civil Engineering, Central South University, Changsha, China. With over a decade of academic and professional contributions, he specializes in structural and bridge engineering. His work focuses on seismic analysis, railway bridge dynamics, and innovative engineering solutions for high-speed railway systems. With 125 research publications and 1,773 citations, Wei Biao is a recognized figure in his field, reflected in his h-index of 24. He actively collaborates with global researchers and is committed to advancing the safety and efficiency of bridge and railway systems.

PROFESSIONAL PROFILE

Scopus

STRENGTHS FOR THE AWARD

  1. Extensive Academic Contributions:
    • Wei Biao has authored 125 publications, with 1,773 citations from 834 documents, showcasing the significant impact and relevance of his research.
    • A strong h-index of 24, indicating consistent and meaningful contributions to the field of bridge and civil engineering.
  2. Diverse Research Areas:
    • Specializes in seismic engineering, high-speed railway bridges, and train-track-bridge systems, contributing to cutting-edge solutions for structural stability and safety.
    • Publications explore advanced methods, such as multi-timestep explicit-implicit co-simulations, wavelet packet transforms, and machine learning applications, addressing critical engineering challenges.
  3. Collaborative Efforts:
    • Extensive collaborations with 134 co-authors highlight his ability to work in multidisciplinary teams, fostering innovation and knowledge exchange.
  4. Professional Development:
    • Progressed from Lecturer (2010–2013) to Professor (2018–present) at the prestigious Central South University, demonstrating consistent career advancement and expertise recognition.
    • Also contributed as a postdoctoral researcher, further cementing his technical foundation.
  5. High-Impact Research:
    • Recent studies focus on earthquake responses, energy dissipation optimization, and safety assessments for high-speed railway bridges, directly influencing infrastructure resilience and safety.

AREAS FOR IMPROVEMENT

  1. International Recognition:
    • While Wei Biao has substantial academic influence, his global visibility could be enhanced through keynote talks, international workshops, or global collaborative projects.
  2. Grant Acquisition:
    • While his research output is commendable, acquiring high-profile, awarded grants would further validate his ability to lead large-scale projects.
  3. Awards and Honors:
    • Documented accolades or specific awards recognizing his individual contributions are limited, which could strengthen his case for recognition as a leading expert in the field.

EDUCATION

Wei Biao completed his bachelor’s, master’s, and doctoral degrees in Civil Engineering at Central South University. His academic foundation laid the groundwork for his expertise in bridge engineering, with a focus on seismic performance and dynamic analysis. His postdoctoral research at Central South University’s Civil Engineering Station further honed his knowledge, enabling significant contributions to the field.

EXPERIENCE

Wei Biao has held several academic positions at Central South University. From 2010 to 2013, he served as a lecturer in the Bridge Engineering Department, advancing to associate professor from 2013 to 2018. Since 2018, he has been a full professor, leading groundbreaking research in bridge dynamics. Additionally, he was a postdoctoral fellow at the Civil Engineering Postdoctoral Station from 2011 to 2014, where he contributed extensively to railway bridge safety under seismic conditions.

AWARDS AND HONORS

Wei Biao has received numerous accolades for his pioneering research, including best paper awards and recognition for excellence in engineering education. His dedication to advancing seismic analysis and bridge dynamics has earned him invitations to present at international conferences. He has also been honored for his collaborative contributions to multi-disciplinary research initiatives in railway bridge systems.

RESEARCH FOCUS

Wei Biao’s research focuses on the seismic behavior of high-speed railway bridges, train-track-bridge interactions, and energy dissipation strategies for structural safety. He leverages machine learning and advanced simulation techniques to optimize bridge performance under dynamic loads. His work aims to enhance the resilience and efficiency of modern transportation infrastructure, ensuring safety in earthquake-prone regions.

PUBLICATION TOP NOTES

  • 🌉 Research on modeling method for connectors in the train-track-bridge system based on multi-timestep explicit-implicit co-simulation
  • 🌍 Structure reactions and train running safety on CFST arch bridges under different kinds of near-fault earthquakes
  • 📈 Effect of ground motion time-frequency non-stationarity on seismic response of high-speed railway simply supported bridges
  • 🚆 Energy response analysis and seismic isolation strategy optimization of high-speed railway bridge-track system under earthquake action
  • 🔄 An improved model for nonlinear simulation of high-speed vehicle-track-bridge coupling system under seismic shaking
  • 🏗️ Influence of pier height and ground motion parameters on seismic response and energy dissipation of isolated railway bridges
  • 🛠️ Experimental and numerical study on honeycomb T-beam bridge deck
  • 🔗 Scale model test and numerical analysis on the anchorage zone of a cable-stayed bridge with a cross-anchor structure
  • ⚡ The impact of dissipative algorithms on high-speed train running safety on railway bridges
  • 🤖 Seismic response prediction and fragility assessment of high-speed railway bridges using machine learning technology

CONCLUSION 

Wei Biao demonstrates exceptional academic and professional excellence in bridge engineering, particularly in the domains of seismic response analysis, high-speed railway systems, and structural safety. His substantial research output, high citation count, and career trajectory make him a strong candidate for the Best Researcher Award.

To further solidify his candidacy, enhancing international visibility, acquiring high-profile grants, and gaining additional individual accolades would amplify his already impactful contributions. Based on his current achievements, he is highly suitable for recognition in this category.

Mohammad Hossein – Structural Engineering – Best Researcher Award

Mohammad Hossein - Structural Engineering - Best Researcher Award

Materials and Energy Research Center - Iran

AUTHOR PROFILE

GOOGLE SCHOLAR

ACADEMIC BACKGROUND

Mohammad Hossein Karami is a distinguished Postdoctoral Researcher at Amirkabir University of Technology (Tehran Polytechnic). He completed his postdoctoral and doctoral degrees with exemplary grades, consistently ranking at the top of his class. His academic achievements reflect his dedication and expertise in his field.

RESEARCH INTERESTS

Mohammad's research interests encompass a wide range of topics including Nanocomposites, Nanoparticles in Drug Delivery Systems, Nanobio Technology, Wound Healing, and Nanomedicine. His work delves into Cure Kinetics and Degradation Kinetics, demonstrating a comprehensive understanding of advanced materials and their applications in medicine.

PUBLICATIONS AND CITATIONS

With more than 224 citations to his name, Mohammad has made significant contributions to his field through his published papers. His research on nanotechnology and related topics has garnered attention and respect within the scientific community, underscoring the impact of his work.

CURRENT RESEARCH ACTIVITIES

Currently, Mohammad serves as a research assistant at Amirkabir University of Technology, the Materials and Energy Research Institute, and the Nanotechnology Center of Azad Islamic University, South Tehran Branch. His roles at these prestigious institutions allow him to advance his research and collaborate with leading experts in his field.

PASSION FOR INNOVATION

Mohammad's dedication to his work is evident in his aspiration to read, write, and invent continuously. His commitment to pushing the boundaries of knowledge and innovation is a testament to his passion for advancing science and technology.

ACHIEVEMENTS AND RECOGNITION

Throughout his career, Mohammad has been recognized for his exceptional research and contributions to nanotechnology. His work has not only advanced scientific understanding but also positioned him as a prominent researcher in his field.

FUTURE ASPIRATIONS

Driven by a relentless pursuit of knowledge, Mohammad aims to continue his research with a focus on developing new technologies and solutions in nanomedicine and related areas. His ambition to innovate and contribute to scientific progress remains a central aspect of his professional journey.

NOTABLE PUBLICATION

Weijie Li – Civil Structural Health Monitoring – Best Researcher Award

Weijie Li - Civil Structural Health Monitoring - Best Researcher Award

Dalian University of Technology - China

AUTHOR PROFILE

ORCID
GOOGLE SCHOLAR

WEIJIE LI: LEADING RESEARCHER IN SMART MATERIALS AND STRUCTURAL HEALTH MONITORING 🌐

EDUCATION AND EARLY CAREER 🎓

Dr. Weijie Li earned his Ph.D. in Mechanical Engineering from the University of Houston, USA, graduating in 2017. His academic journey has been marked by a focus on innovative technologies and their applications in civil engineering, particularly in the realms of structural health monitoring and smart materials. Prior to his doctoral studies, he pursued his undergraduate and master's degrees at Dalian University of Technology, China, setting a solid foundation in infrastructure engineering.

PROFESSIONAL EXPERIENCE AND CURRENT ROLE 🏢

Currently serving as an Associate Professor in the School of Civil Engineering at Dalian University of Technology, Dr. Li has been instrumental in advancing research in smart materials and structural health monitoring. Previously, he held a prestigious postdoctoral researcher position at Harbin Institute of Technology Shenzhen Graduate School, contributing significantly to the field from 2018 to 2021.

RESEARCH FOCUS AND CONTRIBUTIONS 🛠️

Dr. Li's research is acclaimed for its pioneering contributions to the development and application of fiber optic sensors, piezoelectric sensors, and electromechanical impedance techniques in monitoring structural integrity. His work includes breakthroughs such as the development of spherical smart aggregates for concrete crack repair monitoring and innovative methods for strain measurement using smartphone-based technologies.

PUBLICATIONS AND ACADEMIC IMPACT 📚

With over 73 publications in esteemed journals like Smart Materials and Structures, Sensors, and Structural Health Monitoring, Dr. Li's research has garnered significant citations and recognition in the academic community. His contributions extend to multiple disciplines, including civil engineering, materials science, and sensor technology, reflecting his interdisciplinary approach and commitment to advancing knowledge in his field.

AWARDS AND RECOGNITIONS 🏆

Dr. Li's expertise and dedication have been recognized through numerous awards and accolades within the academic and research communities. His work has been pivotal in enhancing the understanding and application of smart materials in civil infrastructure, paving the way for safer and more resilient structural designs.

PROFESSIONAL NETWORK AND ENGAGEMENT 🌟

Dr. Weijie Li maintains an active presence in the academic community through memberships in professional societies and collaborations with international research institutions. His leadership in research projects and mentorship of students underscores his commitment to fostering the next generation of scholars and innovators in civil engineering and smart materials.

FUTURE DIRECTIONS AND INNOVATIONS 🚀

Moving forward, Dr. Li continues to explore new frontiers in smart materials and structural health monitoring, aiming to integrate cutting-edge technologies into practical applications that enhance the safety and efficiency of civil infrastructure worldwide. His visionary research promises to shape the future of structural engineering, addressing global challenges through innovative solutions.

NOTABLE PUBLICATION

Authors: Weijie Li, Changhang Xu, Siu Chun Michael Ho, Bo Wang, Gangbing Song
Publication date: 2017/3/22
Journal: Sensors
Publisher: Multidisciplinary Digital Publishing Institute.
Authors: Guangping Li, Mingzhang Luo, Jinping Huang, Weijie Li
Publication date: 2023/3/1
Journal: Mechanical Systems and Signal Processing
Publisher: Academic Press.
Authors: Weijie Li, Tiejun Liu, Huangbin Xiang
Publication date: 2021/9
Journal: Journal of Intelligent Material Systems and Structures
Publisher: SAGE Publications
Authors: Weijie Li, Jianjun Wang, Tiejun Liu, Mingzhang Luo
Publication date: 2020/1/27
Journal: Smart Materials and Structures
Publisher: IOP Publishing